12V 5A universal ups switching power supply for door access control

12V 5A universal ups switching power supply for door access control

1. Input AC 220V/50Hz, output DC 12V stabilized 3A/5A 2. Direct control of door locks to reduce loading on door inhibitors,
   anti-disturbance, reduced wiring to save costs and reduce possible faults
   3. N/O and N/C contracts for connection to various electric locks
   4. Automatic protection. Power will be temporarily disconnected or the fuse will blow when there is overloading or short-circuit
   5. Delayed switching, settable between 0-15 seconds
   6. Remote control with an optional remote control module. A remote controller is used to activate doors/gates. Control range is up
   to 80m at open field with no disturbance
   7. External Dimensions: 205*164*74mm

1: NO terminal and COM terminal , normally open no output, the key trigger output DC12V, connected electronically controlled
lock(0-15 seconds delay , a positive , three negative ) ;
2: NC terminal and COM terminal , normally closed output DC12V, after the power button is triggered,then the electric or magnetic
latch,Power locks ( 0-15 seconds delay , 2 positive, 3 negative ) ;
3: DC12V output voltage regulation, 4 is positive , 5 negative ;
4: open button input terminal ( for negative power supply ) , which can be accessed switch output(relay output, low )control
Electric lock access control system ;
5: open button input terminal ( on the positive power supply ) , which can be accessed by switch output( relay output, high level )
control , Electric lock access control system ;
6: 12V input voltage door, dedicated to the direct control of the output voltage electric lock access control